TheraLight Multi-Zone bed revealed by a single red seam of light

Designed & Assembled in USA / Only 20 Available Per Month

Multi-Zone 360

We created a bed nobody else could.

Five independently controlled treatment zones. Four wavelengths in every zone. One medical-grade platform built for precision.

MULTI-ZONE / 360

05 Control zones
04 Wavelengths
46,080 Diodes
4,200W Maximum output
01 / PRECISION

True multi-zone control

This Is Not Whole-Body Guessing. This Is Precision Dosing.

Most light beds treat the body like one single target. The Multi-Zone does not. It gives practitioners independent control over five treatment zones, with customized wavelength combinations, intensity, pulsing, and therapeutic strategy. One bed can run five different treatments at once.

Five zones. One deliberate strategy.

5-Zone Control

Use all five zones for a powerful full-body session or tune each zone independently. Every zone can carry its own wavelength mix, intensity, pulsing, and therapeutic strategy.

Zone 01
Zone 02
Zone 03
Zone 04
Zone 05
TheraLight Multi-Zone bed with five treatment zones illuminated at different intensities

Independent zone control / Shown at varied intensity

Every channel. Every zone.

IPW = 35

The Most Energy Efficient Light Bed.IPWā„¢ (Irradiance Per Watt) is the benchmark for photobiomodulation efficiency. A lower IPW means more photons are delivered with less energy demand. Advanced LED technology and intelligent power management help maximize light output while minimizing wasted energy and heat.

TheraLight Multi-Zone bed illuminated at full 4,200-watt output

Four wavelengths in every zone

No Hotspots.
No Dead Zones.

Red light. Near infrared. Deep-tissue support. Instead of being locked into a fixed formula, practitioners can build protocols around the desired outcome, targeted tissue, and individual in front of them.

01

RED

633nm
02

NIR

810nm
03

NIR

850nm
04

NIR

940nm
Multi-Zone quad-cluster architecture showing 633, 810, 850, and 940 nanometer wavelengths
Illuminated repeating array of Multi-Zone LED clusters

Even distribution

Unmatched Light.

No system delivers a more even distribution of LED diodes and wavelengths. Unlike beds built with LED strips, the Multi-Zone is engineered without hotspots or dead zones.

Diodes
46,080
Density
1,161 per sq. ft.
Architecture
Multi-Beam Angle
TheraLight Multi-Zone demonstrating near-infrared output concentrated in Zone 3

Power where you want it

Get Laser-Focused.

Direct up to a 400% irradiance boost from any single wavelength into one selected zone. In the example shown, the full bed remains active while 810 nm near-infrared is concentrated in Zone 3 to focus additional power on the lower back.

More than light

Three Systems.
One Platform.

This is not just a light bed. It combines advanced photobiomodulation with integrated PEMF and A.R.T. (Acoustic Resonance Therapy). Six custom-built resonance transducers and four-program PEMF are engineered into the platform rather than bolted on.

TheraLight Multi-Zone showing integrated PEMF coils and acoustic transducers
01

Multi-Zone PBM

Built-in red and near-infrared presets support common session workflows, with full manual control of wavelength, intensity, pulse, and zone strategy.

02

Integrated PEMF

Four selectable PEMF programs are built directly into the treatment surface.

03

A.R.T. (Acoustic Resonance Therapy)

Six custom transducers deliver programmable frequencies through the treatment surface—creating a physical resonance experience, not simply audio playback.

Listen to the resonance One-minute tonal preview. The bed’s A.R.T. experience is felt through the treatment surface.
RIFE Frequency Input

A wired auxiliary input allows a compatible third-party audio or frequency source—including optional RIFE frequency content—to be connected. The external source, programming, and frequency content are supplied separately.

Practitioner control

Every Variable.One Interface.

The Multi-Zone controller brings zone selection, wavelength mix, frequency, PEMF, and A.R.T. (Acoustic Resonance Therapy) into one clinical control surface.

Important launch-unit noticeThe first 10 beds will ship with the original controller screen. The updated five-zone screen shown here may be included on subsequent production units.

TheraLight Multi-Zone five-zone controller showing independent zone, wavelength, frequency, PEMF, and A.R.T. controls

LUCIUM BREAKS THE SKIN BARRIER

LUCIUM BREAKS THE LIGHT BARRIER.

Luciumā„¢ is a patented refractive index matching topical that reduces surface scatter and improves light transmission through the skin. It enhances penetration and consistency of dosing across all skin types, including darker Fitzpatrick IV, V and VI tones, which traditionally absorb and scatter more light energy. Up to a 70% increase has been observed in higher Fitzpatrick scales.

Explore Lucium
Lucium Red Light Bed Treatment Serum Lucium Red Light Bed Treatment Serum
Patented Technology Refractive index matching
70%+ More penetration on Fitzpatrick 3–6
All Skin Tones Maximum light transmission
52 Human Subjects Validated and clinically tested across different skin types
Tattooed Skin Greater light transmission

ā€œIt’s like turning the skin into glass.ā€

The result: more efficient photon delivery, improved comfort, reduced surface heat buildup, and a dramatically more inclusive full-body photobiomodulation experience. Lucium helps more photons reach deeper tissues by reducing the skin’s natural tendency to scatter therapeutic light.

Fitzpatrick Skin Tone Scale Engineered to deliver effective, uniform light penetration across every Fitzpatrick skin type, from I to VI, so therapeutic results aren’t limited by skin tone.
  1. I
  2. II
  3. III
  4. IV
  5. V
  6. VI
Comparison of traditional light therapy with Lucium topical application and optimized light penetration
TheraLight Multi-Zone with the VO2 Pro and Matrix trainer in a Superhuman Protocol clinic

The Superhuman Protocol v4

Superhuman Protocol v4 combines the Multi-Zone 360 and the VOā‚‚ Pro. PEMF and photobiomodulation are integrated into the bed, while the VOā‚‚ Pro adds oxygen to complete the three-modality protocol. Exclusive to Da Vinci Medical.

  • Multi-Zone 360 Integrated PEMF
  • VOā‚‚ Pro Oxygen
Become a certified Superhuman Protocol location

Designed & Assembled in USA

Made to Order.

Every unit is designed and assembled in the USA and produced in limited monthly batches. Each bed carries an engraved plate with the owner's name, serial number, and the manufacturer date.

20 Limited Production / Per Month
01 Engraved owner plate
Custom engraved Multi-Zone 360 plaque for SlimFit Studio

Technical specification

By the Numbers

Specifications for the
TheraLight Multi-Zone 360 bed.

01 / Light architecture

Treatment zones
5 independently controlled
Wavelengths
633 / 810 / 850 / 940 nm
Diodes
46,080
Diode density
1,161 per sq. ft.
Output
Up to 4,200 W
Irradiance
Up to 120 mW/cm²
Pulse range
Continuous (0 Hz - Steady DC State) + 1–5,000 Hz

02 / Integrated system

Zone control
Wavelength / irradiance / frequency
Diode architecture
Multi-Beam Angle / patented quad-cluster
PEMF
4 integrated programs (up to 40 Gauss)
Acoustic system
6 custom transducers
RIFE frequency input
Optional AUX input / external source required
Validation
LM-80 LED report / output consistency over time
Build & ownership
Hand-built in the USA / 20 per month / engraved owner plate

Private launch presentation

See Why the Multi-Zone 360Changes the Category.

In 15 minutes: see the engineering, zone control, integrated modalities, and ownership opportunity for clinics, practitioners, wellness businesses, and private buyers.